Natural dyes can be used in dye sensitized solar cells (DSSCs) to generate low-cost devices, although with low light harvesting because of energy losses from the recombination process. This study investigates recombination reactions in DSSCs with natural dyes extracted from eggplants, plums, and hibiscus flowers. Titanium dioxide films were coated on a fluorine-doped tin oxide glass conductor substrate by the doctor blading method and impregnated in a dye solution for 24 h. Electrodeposited platinum was used as the cathode, and I3–/I– as the redox couple. The techniques employed were: intensity modulated photovoltage spectroscopy, intensity modulated photocurrent spectroscopy, electrochemical impedance spectroscopy, charge extraction, and cyclic voltammetry. The results show that cells containing plum dye exhibited the best photovoltaic parameters, with high values of gap, charge extraction, and potential, being less resistive to charge transfer with an electron lifetime of 0.51 s, collection time of 8.54 ms, and charge efficiency collection of 0.99.

Dye-sensitized solar cells using natural dyes have lower cost when compared to ruthenium-based dyes. This paper aims to evaluate, electrochemically, solar cells composed of TiO2 with dye extracted from the Hibiscus(var. Sabdariffa) and propose an adsorption model capable of predicting the adsorption mechanism of the dye on the semiconductor surface. The characterization techniques used were: Fourier Transform Infrared Spectroscopy, UV-VIS Spectroscopy, Measurement of the Open Circuit Potential, Photocronoamperometry, and Current Density Curves vs. Potential. The infrared spectroscopy confirmed there was adsorption of dye on the TiO2 surface. The adsorption isotherm with the better value of linear coefficient (R= 0.9874) was the Langmuir isotherm. The electrochemical techniques showed that the best cell prepared from a solution with a concentration of 5.27 mg L-1 of the natural dye, had an Eca= 516 mV, j = 0.15 mA cm-2 and an energy efficiency (η) of 0.15%.